- DTN Headline News
America's Best Shops - 4
Tuesday, January 15, 2019 2:18PM CST
By Dan Miller
Progressive Farmer Senior Editor

BIRMINGHAM, Ala. (DTN) -- The best tool for designing a new shop is a tape measure, said Dan Nyberg, sales training manager for Morton Buildings Inc. Measure the footprint of your field equipment and trucks, and consider how the equipment will fit.

For example, if you bring a planter into your shop for calibration, can you unfold it? Imagine the planter in pieces. "Just when you have that planter torn down, you will have another piece of equipment that needs some TLC," Nyberg said. "Will there be room to do that work, too?" Calculate the space for new equipment. None is getting smaller.

Calculate the footprint for dedicated work areas -- welding, lubricants, workbenches, parts storage, compressor, conference room and office.

Add the maintenance areas and the dedicated work areas to calculate your need for square footage. Drive T-posts into the four corners of that building footprint. Drive around the area. Park equipment inside the footprint. Measure distances to storage sheds and grain facilities. Consider roads and drives to ensure unobstructed traffic patterns. Mark spaces for potential doors, and drive through them to ensure easy movement.

LOCATION SCOUTING

The easiest place to put a building may be the wrong place. Water and power runs are one-time charges. But, the site of the building is forever. Download a Google Earth image of your farm. Spend time looking at potential building locations. Does shop design make sense given traffic patterns and location?

Build the biggest shell you can afford, Nyberg said. Sure, he works for Morton. But, experience tells him it is far too easy to erect a too-small building. He suggests a couple of ways to control initial construction costs.

First, finish only a portion of the new building. The rest can be completed over time. Second, build for expansion. Position the building so it can be expanded at either end. An end-to-end addition is cost-effective. If that layout doesn't fit the location, install a doorway header into a sidewall where the shop and new space will join.

HEIGHT

Consider ceiling clearance. Tillage equipment with wings folded may be higher than the top of a combine. Bin extenders add a foot or 18 inches to the height of a combine. Ceiling lights reduce clearances.

STAGING AREA

Create outside space around the shop for vehicular traffic, to complete repairs and to resupply and refuel equipment. Include space for vehicle parking. Rule of thumb: Plan for the staging area to be at a minimum equal to the width of your buildings. For example, a 60-foot-wide shop should have at least 60 feet of staging area, measured from the building's major doors.

VISUAL CONNECTION

Visual connection allows the owner to look out of his office window and see what he wants to see, Nyberg said. Does the owner want to see the weigh scale? Visual connection determines orientation of the building.

OFFICE

Office design is thick with detail. Hire an expert. But, when you think about space, consider the desk. A desk where general day-to-day work is done may need less space than a desk where maintenance and equipment records are maintained. The maintenance desk may need room for file cabinets and shelving, maybe a printer, perhaps a table. If the family business includes a semiretired father or grandfather, make sure that person has a desk.

DOORS

Of door types -- bifold, overhead and sliding -- hydraulic dominates new construction. "Overhead doors require 'headroom' to account for the curve of the track. In an 18-foot-tall building, there may be room only for a 16-foot overhead door. Hydraulic doors require only the headroom for the door hinges -- you lose almost no space," he said. It is increasingly common for the hydraulic door to be 45 to 50 feet wide. That is also 45 to 50 feet of outside cover when the door is raised.

WALK DOORS

Well-placed walk doors "raise the satisfaction level in the shop," Nyberg said. They are relatively inexpensive in new construction. Make sure to put walk doors adjacent to parking areas and near the shop's larger doors.

HEAT

Hire a consultant and install ceiling fans to mix the air. In-floor heat is "comfortable heat. The heat is radiating past you," Nyberg explained. Radiant heat can be directed to specific portions of the shop. But, radiant heat can leave heat shadows where heat flow is blocked by equipment.

POWER

"The four rows of lights and four-switch days are gone," Nyberg said. A qualified electrician will design a recommendation for the shop's electrical service, lighting and plugs. Outlets every 10 feet around the shop are not too many. Several outlets for welders should be placed around the shop but definitely at the main doors.

COMPRESSED AIR

Consider a sound-insulated yet well-ventilated compressor space. It's hard to have too many air drops (with drains). Install a drop at each of the main doors.

There is a key to planning that's sometimes overlooked, Nyberg said. Some planning time should include visits to neighbors who have recently built new shops. "Just being able to see how big 'XX' foot by 'YY' foot is for yourself can be extremely helpful," he explained.

"Enjoyment and efficiency are very closely tied to the planning done before construction begins," Nyberg said. "Plan well and enjoy the process."

**

Editor's Note:

This is the fourth and final story in DTN/The Progressive Farmer's series on America's Best Shops where growers share their resourceful and innovative ideas for indoor workspaces.

Dan Miller can be reached at dan.miller@dtn.com

Follow him on Twitter @DMillerPF

(ES)


blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Monday, January 14, 2019 11:24AM CST
Friday, January 11, 2019 1:10PM CST
Monday, January 7, 2019 11:48AM CST
Technically Speaking
Editorial Staff
Monday, January 7, 2019 8:15AM CST
Monday, December 31, 2018 1:46PM CST
Monday, December 24, 2018 8:54AM CST
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Wednesday, January 16, 2019 12:47PM CST
Monday, January 14, 2019 1:56PM CST
Thursday, January 10, 2019 12:53PM CST
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Thursday, January 17, 2019 9:54AM CST
Wednesday, January 16, 2019 1:03PM CST
Monday, January 14, 2019 9:43AM CST
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Monday, January 7, 2019 4:47PM CST
Tuesday, December 18, 2018 4:55PM CST
Monday, December 10, 2018 2:16PM CST
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Thursday, January 17, 2019 6:01PM CST
Friday, January 11, 2019 12:18PM CST
Wednesday, January 9, 2019 2:11PM CST
DTN Ethanol Blog
Editorial Staff
Wednesday, January 16, 2019 3:24PM CST
Tuesday, January 15, 2019 1:01PM CST
Tuesday, January 15, 2019 8:11AM CST
DTN Production Blog
Pam Smith
Crops Technology Editor
Thursday, December 20, 2018 3:57PM CST
Friday, November 16, 2018 4:00PM CST
Thursday, November 1, 2018 6:46PM CST
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Thursday, December 20, 2018 3:01PM CST
Friday, December 7, 2018 4:51PM CST
Thursday, November 29, 2018 5:04PM CST
South America Calling
Editorial Staff
Wednesday, January 16, 2019 3:16PM CST
Wednesday, January 9, 2019 5:38PM CST
Wednesday, January 2, 2019 5:15PM CST
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Friday, January 11, 2019 1:35PM CST
Wednesday, January 2, 2019 6:30AM CST
Monday, December 24, 2018 10:56AM CST
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Friday, January 11, 2019 2:00PM CST
Wednesday, January 2, 2019 4:28PM CST
Tuesday, November 20, 2018 11:58AM CST
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Thursday, January 17, 2019 4:13PM CST
Wednesday, January 16, 2019 4:42PM CST
Monday, January 14, 2019 3:51PM CST
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Monday, December 31, 2018 7:02AM CST
Tuesday, December 18, 2018 4:49PM CST
Monday, November 26, 2018 9:13PM CST
 
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN